How do you change the draw length on a Diamond Razor Edge?

What is the max draw length on a diamond infinite edge?

Infinite Edge Pro Innovations

That’s no surprise, with a maximum draw length of 31 inches, and the ability to go all the way down to 13 inches, nearly every shooter can call the Infinite Edge Pro their own. Not to mention 65 pounds of draw weight adjustment, that’s right, 65 pounds.

How do I measure my draw length?

To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.

How do you adjust the draw weight on a bow?

To adjust the draw weight, we have to unload or load more stress (flex) on the limbs; we do that by tightening or loosening the limb bolts. To raise draw weight to maximum poundage, tighten the limb bolts (clockwise) until both limbs are tight against the riser.

IT IS INTERESTING:  Frequent question: What can you do with brilliant diamond gemstone?

What is the difference between the diamond infinite edge and the pro?

The Infinite Edge is the first generation of this lineup. While there were some improvements made in the Pro, the first generation Edge is largely the same. It has a bit smaller axle to axle measurement, and only goes to a 30” draw length. Finally, the Edge has a 75% let-off compared to the Pro’s 80%.

Who makes diamond bows?

Diamond Archery by Bowtech

Headquartered in Eugene, Oregon, Bowtech employs over 300 team members. It is the parent company of brands like Diamond Archery, Stryker Crossbows, as well as Excalibur crossbows, based out of Kitchener, ON, Canada.

What year is the diamond infinite edge?

2013 brings three new bows to the Diamond Archery stable: the Core, Infinite Edge and Atomic. Also making an appearance for another year is the popular Outlaw.

Is arrow length and draw length the same?

Draw length – Put simply your draw length is how far you draw back the bow string to your anchor point. This is measured in inches so mine is a just under 28 inches 27 1/2 if you want to be exact. Arrow length – Your arrow length is how long your arrow is.

How long should arrows be for a 26 inch draw?

How to: Select the perfect arrow

Bow Arrow length
Draw weight lb. 25″ 26″
15-20 700 700
20-25 700 700
25-30 700 600

How long should my arrows be for a 28 draw?

If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.

IT IS INTERESTING:  Have they found the necklace from Titanic?

Does changing draw weight change draw length?

The weight of a bow (the ‘poundage’) is always measured at a standard 28″ draw length, but that weight changes at different draw lengths. … For each inch over (or under) 28 inches, your bow weight will increase (or decrease) by 2.5 pounds.

Does draw length affect arrow speed?

The longer your draw length, the longer your bow’s powerstroke will be – and the faster your bow will shoot. As a general rule, 1″ of draw length is worth about 10 fps of arrow velocity.