How do you protect diamond cut alloy wheels?

How do you protect diamond cut alloys?

There is no real good solution to them unfortunately apart from getting them powder coated or painted. As there is only a coat of lacquer on the diamond cut part of the wheel they are very easily damaged. You can try and get them ceramic coated or use a good sealant to aid protection. Use sealants, waxes etc.

How do I stop my diamond cut wheels from corroding?

The safest way to extend the life of your diamond cut wheels is to clean them with a pH neutral wheel cleaner. Avoid cleaning with acid or alkaline based wheel cleaners as these can often cause discolouration or corrosion when used excessively.

How do you take care of diamond cut wheels?

They should be cleaned with a mild shampoo. Do not use acid or alkaline-based wheel cleaners – this will help to avoid any discolouration of the wheel. Diamond cut wheels also generally have pretty harsh edges so it’s best to use an air blower (if you have one), rather than cloths.

IT IS INTERESTING:  Can you put jewelry on layaway at Sam's Club?

Do you lacquer diamond cut wheels?

What is a diamond cut wheel? This is an alloy wheel which has been put on a lathe and part of or the entire painted surface of the wheel machined off to leave a shiny alloy finish. A small part of the actual alloy is machined off to create this finish. It is then lacquered over to prevent corrosion.

How do I know if my alloys are diamond cut?

If the wheel is two-tone, with a darker inner and a silver outer, then it is highly likely to be a diamond cut alloy wheel (left-hand side photo). This type of wheel has a machine turned face over a painted background.

Does wheel wax really work?

Wheel Wax actually has a great cleaner in the formula which allows you to clean off brake dust and apply the great Wheel Wax protective shine in one easy step. Simply rub Wheel Wax directly on each dirty wheel and let it dry to a haze. … Wheel Wax works on all chrome, aluminum and stainless appearance pieces on your car.

Do Diamond cut alloys rust?

Diamond Alloys can take badly corroded alloy wheels and refurbish them back to a brilliant finish. Check out these badly damaged alloy wheels before and after their Diamond Alloys transformation! Corrosion to alloys wheels can easily happen and will result in your alloys looking damaged, worn and undesirable.

Can Diamond cut alloys be powder coated?

Can I get powder coated alloys diamond cut? Yes, all our Diamond Cut allows wheels have a powder coat base. This can be painted a colour to accentuate the effect of the cut.

IT IS INTERESTING:  Frequent question: Why does my necklace chain keep breaking?

How many times can you refurb diamond cut alloys?

Generally speaking, you can repair or recut your alloy wheels 1 to 2 times. However, the technician working on your alloy wheels will be able to advise you accordingly.

Are diamond cut alloys good?

There is no doubt that diamond-cut wheels look stunning and modern, but they are also quite prone to damage and are very hard to adequately refurbish if they get chipped and scraped. Those fine lines are no match for the harsh reality of urban driving, and all owners realise that sooner or later.

How many times can you diamond cut wheels?

How many times can you re cut/refurbish a diamond cut wheel? Each wheel is different and this can depend on how badly damaged the alloy wheel is, but as a very generalised rule an alloy can normally be cut 1 – 2 times.

How do you get stains out of diamond cut alloy wheels?

Avoid using snow foams with colouring agents as they can stain diamond cut wheels. Spray the tyre wall with wheel cleaner and tackle the dirt with a stiff bristled tyre brush. Only use a pH neutral or pH balanced wheel cleaner as acid or alkaline based cleaners can discolour the surface of your wheel.

Can you repair diamond cut wheels?

Diamond-Cut alloys cannot be repaired at home, as they require a lathe to be refurbished. Diamond-Cut alloys are first removed from the vehicle and are repaired using a lathe. The lathe removes old layers of lacquer and paint, this provides a smooth surface for repairs.

IT IS INTERESTING:  Did Sean Connery want to do diamonds are forever?

Are diamond cut wheels clear coated?

Diamond Cut Only

This process involves cleaning your wheel, re-cutting the outer face and finally a clear coat is applied. Our diamond cutting process involves the latest CNC technology that offers the finest finish for your alloy wheels.

Do alloy wheels have clear coat?

All alloy wheels are finished with a clear coat of paint for a glossy and protective layer. After a while, the clear coat fades, looks dull and can begin to turn yellow from oxidation.